Vertically Suspended Pumps

The vertical pumps designed by OME Motors allow the suction of water up to a depth of 1000 meters in accordance with the model chosen. The great variety of models with peculiar characteristics make the vertical axis pumps designed by OME a valid choice for different types of applications. The extreme versatility of this series of vertical centrifugal pumps makes them suitable for various industrial applications in the textile, chemical, petrochemical and refinery sectors; for the transfer of abrasive agents, acids and solvents.

Specifications

Category	Products, Pumps
design	ISO 13709 - API 610
capacity iso	Up to 6000 m3/h
capacity us	Up to 26420 Gpm
head iso	Up to 500 m
head us	Up to 1640 feet
temperature range iso	-80 - +250 Dec C
temparature range us	-176 - +482 Dec F
pressure range iso	Up to 100 bar
pressure range us	1450 psi
material range	Carbon Steel, SS, Duplex, Super Duplex, Hast alloy
nozzle direction suc dis	Side / Side
motor sync speed iso	1500 / 3000 rpm
motor sync speed us	1800 / 3600 rpm
flange standard	ANSI / HG / DIN / JIS

Applications

Power plants
Cryogenic
Chemical & Petrochemical plants
Refineries

Types of vertical pumps

OME Motors proposes a line of vertical axis centrifugal pumps in 4 recently improved versions:

VMT pumps: these are vertically suspended pumps designed for installation in wet environments, they are used in the chemical and petrochemical sectors, at cryogenic temperatures, where vertical lifting is required and in water cooling processes.

– Max. flow rate: 6000 m3/h

– Max Preval: 500 m

– Temperature range: -80 +250 °C

VSL pumps (VS4): the VSL series of pumps are designed in accordance with current regulations that establish universal parameters to be followed for the construction of details, is therefore a valid alternative to the more standard VS4 with the advantage of greater efficiency, can be supplied with a wide variety of competitive hydraulic options

– Max. flow rate: 1100 m3/h

– Max Preval: 135 m

– Temperature range: -80 +500 °C

VMB pumps (VS6): The VMB series of pumps are designed for the removal and recovery of high temperature liquids, such as condensate from water vapour or hydrocarbons. Widely used in the petrochemical sector and in power plants. The high efficiency and low cost make the VMB pump the best fit for this field of application.

– Max. flow rate: 1800 m3/h

– Max Preval: 1000 m

– Temperature range: -80 +250 °C

VSC pumps (VS5): the VSC series of pumps are designed in accordance with the regulations in force, which establish universal parameters to be followed for the construction of details, and are therefore a valid alternative to the more standard VS5. The presence of suspended bearings in a trolley above the cover plate provides protection in case of flooding. Particularly suitable for the transfer of abrasive substances or contaminated liquids.

– Max. flow rate: 400 m3/h

– Max Preval: 60 m

– Temperature range: -20 +200 °C